1. Download and Install the Software:

   • Visit the official Surfshark VPN website.
   • Download the installer for your operating system (Windows, macOS, or Linux).

2. Set Up Custom Credentials:

   • After installation, open the installer and click "Allow" to bypass security settings.
   • Navigate to the "Network & Storage" section and click "Change" to modify your username and password.

3. Configure Local Network:

   • Go to "Local Network" settings.
   • Set up a local port for your local machine (e.g., 22) and configure a username and password for your local account.

4. Set Up VPN Site:

   • Navigate to the "VPN" section and select your preferred domain or IP address.
   • Enter your custom username and password.

5. Configure Local Network for VPN:

   • Go to "Local Network" and ensure your local machine is allowed to connect to the VPN.
   • Enable the VPN host IP address and use the custom username and password.

6. Configure VPN Settings:

   • Access the VPN settings and enable the HTTPS protocol.
   • Set up the VPN path and protocol (HTTPS).

7. Enable and Configure Firewall:

   • On your local machine, configure a firewall to block traffic from the local network to the VPN.
   • Set up a username and password for the firewall.

8. Test VPN Functionality:

   • Use the VPN as a browser to check traffic is blocked.
   • Troubleshoot if issues arise, ensuring your settings are correct.

9. Additional Security Features:

   • Enable encryption and backfire protection on the VPN for enhanced security.
   • Look for guides and tutorials for further assistance.

10. Changing VPN Passwords:

    • Log in to the VPN to change your password.
    • Update your username and password as needed.

By following these steps carefully, you can set up Surfshark VPN properly and ensure secure browsing.